CIC Data Base Inquiry
Reference No. 132
1999 (or possibly 92-00) GM Escalade, Blazer, Tahoe and Yukon
R&R Radio Antenna Cable

Date of Inquiry:            December 20, 2001

Posted to Website:        August 6, 2003

Time allowance:            Mitchell                        .7 

                                    Labor text note:            None               

                                    Motor/CCC                 .5

                                    Labor text note:            None                      

                                    ADP                            presently not known

Note: The antenna cable is a two part unit, the cable on the antenna side is serviced with the antenna base and the cable in question is the “extension cable” that routs from the inner fender to the radio. Because the data base does not list the cable that runs from the antenna base cable to the radio the time shown in the crash guide can be misrepresented. To replace the base cable, the heater box requires separation along with other miscellaneous components. The operation can take as long as 4.0 hours.

Issue:

Motor/CCC

1.       part not listed

2.       No text note 

Mitchell

1.       Part not listed

2.       No text note

ADP

1.       Part not listed

Response:

Mitchell

            Pending

¨       ADP

            Pending

¨       Motor/CCC  - Added  antenna cable, base to radio, part# 15753658 with labor time of 0.3 hours and footnote “Time is after all necessary bolted on parts are removed.”    DR1GC92, DR1GA92, DR1GH95

Suggestion:

Mitchell

1.       List part with a labor allowance and/or a “labor text notation.”

¨       Motor 

1.       List part with a labor allowance and/or a “labor text notation.”

ADP

1.       List part with a labor allowance

     Back to DB Inquiries List      Estimating Committee Page