Subject: labor note addition

Time allowance: Mitchell 7.2 hrs. (section allowance)

18.7 hrs. (full replacement allowance)

Labor text note: None

Motor 7.0 hrs. (section allowance)

18.7 hrs. (full replacement allowance)

Labor text note: “Time is to cut in windshield opening and rocker rearward of hinge pillar”

ADP Presently not known

CCC Same as Motor

Labor text note: Same as Motor

Inquiry (as stated by inquirer)

Mitchell and Motor:

To facilitate the replacement of the hinge pillar, the welded “apron reinforcement” panel must be removed for access (Part number 60613-S84-A00ZZ, front inner structure section).

Suggestion

To All:

Please review operation and include labor note identifying additional operation.

Response:
ADP:

We had previously reviewed this operation with the help of a shop doing the work. We found out that our time was low so we raised it to 16.1 hrs. We believe this time is sufficient to cover the operations necessary to replace this part.

Motor Information System 10/8/2004 - (ARG4422) Reviewed times. Added footnote to Sectioning Operations, section uniside, hinge pillar, “Time is after upper rail is removed.

Back to DB Inquiries List Estimating Committee Page