|
CIC
Data Base Inquiry |
|
|
Date of Request:
February 3, 2003 Subject:
Non reusable part
Make:
Dodge
Model:
Dakota Quad Cab Year:
01-03 Operation:
R&I rear door upper trim panel (5GH12XDVAD, slate gray) Time
allowance:
Mitchell (grille)
.1
Labor
text note:
With trim panel removed, not included in R&R
trim panel.
Motor (grille) .2
Labor
text note:
Time is after trim panel is removed
ADP
Presently not known
CCC
Same as Motor
Labor
text note:
Same as Motor
Inquiry
(as stated by inquirer) WE
REPLACED A LEFT REAR DOOR ON A 2001 DODGE DAKOTA QUAD CAB. THE
INTERIOR TRIM (PART# 5GH13WL5AD) SURROUNDING THE STATIONARY VENT
WINDOW CANNOT BE REMOVED WITHOUT BREAKING THE MOUNTING TABS. THERE
ARE STEEL CLIPS HOT WELDED TO THE PROTRUDING PLASTIC TABS FROM THE
TRIM PIECE. WHEN REMOVING THE TRIM THE PLASTIC TABS BREAK OFF.
EITHER WE HAVE TO GLUE OR REWELD THE TABS (WHICH IS NOT COST
EFFECTIVE; APPROX $35 RETAIL) OR REPLACE. Suggestion
To
All: Please review these operation. Please consider listing this part as not reusable
Response: Motor Information System 10/8/2004 - Refer to GTE pages, G6, Damaged or Non-Reusable Moldings and Fasteners
Mitchell 10/12/2004:
Review of Dodge service information does not show this
part as being non-reusable. With this in mind, Mitchell
cannot state this as non-reusable.
|
|